Double Glazing Spacer Bar Sizes: A Selection Chart for IGU Manufacturers

November 13, 2026
أحدث حالة شركة حول Double Glazing Spacer Bar Sizes: A Selection Chart for IGU Manufacturers

Double Glazing Spacer Bar Sizes: A Selection Chart for IGU Manufacturers

Choosing the wrong spacer bar width is one of the most common mistakes in insulating glass production — and one of the most expensive to fix. A bar that is too narrow leaves the glass panes touching under wind load; a bar that is too wide traps the wrong cavity depth and hurts the unit's thermal performance.

This guide gives you the standard double glazing spacer bar sizes, explains how to match width to your glass and cavity, and shows which sizes dominate in which markets.

1. The Standard Width Series: 6A to 20A

Aluminum spacer bars are named by their cavity width, measured in millimeters:

Size Typical cavity Common application
6A 6 mm Thin double glazing, interior glass partitions
9A 9 mm Standard residential double glazing
12A 12 mm The most widely used size worldwide
16A 16 mm High-performance IGU, argon-filled units
20A 20 mm Triple glazing and passive-house builds

 

The "A" simply marks the air cavity. When a customer asks for "12A spacer bar," they mean a bar that creates a 12 mm cavity between the two glass panes.

2. How to Match Spacer Width to Your Glass Build

The spacer width is not chosen alone — it must fit the whole unit:

  • Cavity depth drives performance. For double glazing, cavities of 12–16 mm filled with argon typically deliver the best U-value. Below 9 mm, the gas layer loses effectiveness; above 20 mm, convection inside the cavity starts working against you.
  • Total unit thickness is regulated by frames. A 4-12-4 unit (4 mm glass + 12 mm spacer + 4 mm glass) is 20 mm overall and fits standard window profiles. Check your customer's frame rebate depth before fixing the size.
  • Triple glazing stacks up fast. A 4-12-4-12-4 unit is 36 mm — which is why triple-glazing markets order proportionally more 12A and wider bars.

Practical rule: glass thickness + spacer width + glass thickness = unit thickness, and that sum must fit the frame. Measure twice, order once.

3. Wall Thickness and Bending: The Specs Behind the Width

Width is only half of the spec sheet:

Parameter Typical range Why it matters
Wall thickness 0.20–0.35 mm Thicker walls = stiffer bar, better for large units
Height Standard profile height (see catalog) Must fit the IGU line's roller track
Holes Perforated / keyhole Affects desiccant filling and bending
Length Standard 5m sticks Fewer offcuts = lower waste per unit

If your production line bends spacer bars on a machine (rather than using corner keys), confirm the bar's bendability rating with your supplier before switching sizes — wider bars behave differently on the bending wheel.

4. Which Sizes Does Your Market Actually Order?

Demand patterns differ by region:

  • UK & Northern Europe: 12A and 16A dominate, driven by retrofits and energy regulations
  • North America: 11.5 mm equivalents and 13A are common in dual-seal lines
  • Middle East & Africa: 9A and 12A for standard residential glazing
  • Triple-glazing markets (Germany, Nordics): 12A–16A pairs in triple units

If you are setting up a new IGU line and unsure where to start, 12A is the safest first stock item — it covers the widest range of residential applications.

FAQ

Q: What is the difference between 9A and 12A spacer bars? A: The cavity width. 9A creates a 9 mm cavity, 12A a 12 mm one. Wider cavities (up to ~16 mm with argon fill) generally insulate better, but the size must fit the window frame's total thickness.

Q: Can I mix different spacer widths in one order? A: Yes — most suppliers ship mixed-width orders in one container. This is common for IGU producers stocking several sizes.

Q: Do you supply custom widths? A: Non-standard widths are usually possible above a minimum order quantity. Send us your required size and quantity for confirmation.

Get your quote: Send us your size list → get a current FOB quote within 24 hours.

Inquiry form: https://www.rockaluspacer.com/contactnow.html

WhatsApp: https://wa.me/8613098897296